Olympus FL-36 - Manual (Page 8)

15 14
1. Open the battery compartment cover.
2. Insert the batteries with correct +/– polarity.
3. Close the battery compartment cover.
LOADING BATTERIES
The batteries are available separately. Always use one of the following battery combinations.
• AA (R6) alkaline batteries (LR6 type) ................................... x 2
• AA (R6) Ni-Cd batteries ....................................................... x 2
• AA (R6) Ni-Mh batteries ....................................................... x 2
• AA (R6) Ni-Mn batteries (ZR6 type) ..................................... x 2
• AA (R6) lithium batteries (FR6 type) .................................... x 2
• AA (R6) oxyride batteries (ZR6Y type) ................................. x 2
• Lithium battery pack (CR-V3 type) (Olympus LB-01) ........... x 1
• The AA (R6) manganese batteries cannot be used.
Recommended Batteries
The flash’s charging circuitry is optimized for use with the following batteries:
• AA (R6) Ni-Mh battery
• Lithium battery pack (CR-V3 type) (Olympus LB-01)
How to load the batteries
Notes
• Do not mix old and new batteries or batteries of different types together.
• Remove the batteries when the electronic flash is not going to be used for a long period.
• Carry spare batteries when traveling or when using the flash in cold areas.
CR-V3 AA (R6) batteries