Oki RT322POS - Manual (Page 21)

– 17 –
4. Consumable Parts and AC Adapter
When consumable parts have run out, use those specified in the table below.
Make sure that the AC adapter specified in the table is used.
Use of consumable parts or AC adapter which are not specified in the table may result in dam-
age to the printer, fire or electric shock.
4-1. Thermal Paper Roll
(1) Paper roll specification
Width: 115.5±0.5 mm or 79.5±0.5 mm
Outer roll diameter: ø100 mm or less
Take up paper roll width: 112 +0.5
-1
mm or 80 +0.5
-1
mm
Thickness: 65~150 µm (when using 115.5 mm width paper)
65~85 µm (when using 79.5 mm width paper)
Core outer/inner diameter
Paper thickness Core outer Core inner
65~75 µm ø18±1 mm ø12±1 mm
65~75 µm ø32±1 mm ø25.4 mm
75~150 µm ø32±1 mm ø25.4 mm
Printed surface: Outer edge of roll
Tail end handling: Do not use paste or glue to secure the paper roll or its core.
Do not fold the tail end of the paper.
(2) Recommended paper
Manufacture Product name Quality characteristics/Use Paper thickness
(µm)
Mitsubishi Paper Mills
Limited
P220AG normal type paper 65
HP220A high image stability paper 65
HP220AB-1 high image stability paper 75
P220AGB normal type paper, card ticket 80
P220AB normal type paper, card ticket 85
P220AC-1 normal type paper, card ticket 95
P220AC normal type paper, card ticket 105
P220AD normal type paper, card ticket 130
P220AE-1 normal type paper, card ticket 150
PB670 2 color paper: Red & Black 75
Mitsubishi HiTec Paper
Flensburg GmbH
F5041 normal type paper 60