Oki RT322POS - Manual (Page 56)

– 52 –
13. USB and Ethernet Interface
13-1. USB Interface Specifications
1. General Specification: Conforms to USB 2.0 Specifications
2. Communication Speed: USB Full Speed Mode (12 Mbps)
3. Communication Method: USB Bulk Transmission Mode
4. Power Specifications: USB Self-power Function
5. Connector: USB Up-Stream Port Connector (USB Type-B)
13-2. Ethernet Interface Specifications
1. General Specification: Conforms to IEEE802.3
2. Communication Media: 10 Base-T/100 Base-TX
3. Communication Speed: 10/100 Mbps
4. Protocol: TCP/IP
5. TCP/IP detail: ARP, RARP, BOOTP, DHCP, LPR, #9100, FTP
HTTP, TELNET, TFTP
6. Connector: RJ-45 (8-pin modular)
Note: Factory-set login password for administrator
One of the following protocols may be used for changing the settings on this product:
HTTP (web), TELNET, or FTP. To do so, it is necessary to log in using an adminis-
trator account for the product.
Use the following administrator account information on HTTP (web), TELNET, or
FTP.
Administrator account name: “root” (required)
Password: “public” (required)
The password may be changed after logging in.