Oki B 6500 - Manual (Page 12)

B6500 Network Guide> 12
C
ONFIGURATION
I
NTRODUCTION
The B6500 is a fast 100BASE-TX/10BASE-T network capable printer.
It supports major protocols such as TCP/IP and Ethertalk. This
section details configuring the printer's network interface and should
be done prior to configuring your computer.
I
NITIAL
IP A
DDRESS
The factory configuration is for the printer to obtain an IP address
automatically from your networks’ DHCP server.
Use the printers’ console to determine the printers’ address.
1. Press the <MENU> button on the control panel.
2. Press the <T> button until the text “Network Menu” is
shown on the first line of the display.
3. Press the <X> button to enter the Network menu.
4. Press the <S> or <T> buttons to move through the
submenus until the text “IP Address” is shown on the first
line of the display.
5. Note the IP address shown on the second line of the display.
If your network does not have a DHCP server, the IP address will
have to be set manually.
Use the printers’ console to manual set the printers’ address.
1. Press the <MENU> button on the control panel.
2. Press the <T> button until the text “Network Menu” is
shown on the first line of the display.
3. Press the <X> button to enter the Network menu.
4. Press the <S> or <T> buttons to move through the
submenus until the text “IP Address Set” is shown on the first
line of the display.
5. Press the <X> button to enter the submenu