Oki B 6500 - Manual (Page 36)

B6500 Network Guide> 36
-C O
PTION
(
LPR
C
OMMAND
)
This section explains the functions which can be specified and
printing operations which will be affected by the -C option.
The -C option is available only when the SunOS directs the printer
to enter the spool mode.
Important:
• When the PostScript logical printer that was configured on
the printer web page and -C option of "lpr" command have
been specified simultaneously, some of the actions cannot be
guaranteed to work. Also, when specifying the PostScript
logical printer as a default printer on Unix, it is recommended
not to user the -C option by "lpr" command.
F
UNCTION
The following items can be set up by using the -C option:
NOTE
Any parameter other than below becomes invalid if specified.
Selecting a Paper Tray
When selecting a paper tray, either the paper size or the tray itself
is specified. If the paper size is specified, the printer automatically
searches and selects the tray where the specified paper is loaded.
The following parameters can be specified:
PARAMETER DESCRIPTION
INTRAY1/intrayl Selects Tray 1.
INTRAY2/intray2 Selects Tray 2.
INTRAY3/intray3 Selects Tray 3 (option).
INTRAY4/intray4 Selects Tray 4 (option).
A4/a4 Selects the tray where A4 paper is loaded.
B5/b5 Selects the tray where B5 paper is loaded.
A5/a5 Selects the tray where A5 paper is loaded.
LETTER letter Selects the letter size.
LEGAL/legal Selects the legal size (8.5 x 14).