Oki C710n - Manual (Page 35)

35 – C710n User’s Guide
Network
Setup
(cont.) FTP Enable
Disable Sets Enable/Disable of FTP.
Enable: FTP is available.
Disable: FTP is not available.
TCP/IP should be enabled.
SNMP Enable
Disable Sets Enable/Disable of SNMP.
Enable: SNMP is available.
Disable: SNMP is not available.
TCP/IP or NetWare should be
enabled.
Network
Scale Normal
Small When Normal is selected, the
network can work effectively
even when it is connected to a
HUB that has a spanning tree
feature. However, printer start
up time gets longer when
computers are connected with
two or three small LANs.
When Small is selected,
computers can cover from two
or three small LANs to a large
LAN, but may not work
effectively when the network is
connected to a HUB with a
spanning tree feature.
Hub Link
Setting Auto
Negotiate
100Base-TX
Full
100Base-TX
Half
10Base-T Full
10Base-T Half Sets a method to link to a HUB.
When Auto is set, a connection
method to a HUB is selected
automatically.
Factory
Defaults? Execute Specifies whether to initialize
the network factory default
settings for the Network.
ITEM SETTINGS EXPLANATION