Oki C710n - Manual (Page 37)

37 – C710n User’s Guide
Print
Setup
(cont.) Toner
Save
Mode
On/Off This function works effectively
only if the data input is color
RGB data. This setting is valid
in PS and PCL, but does not
take effect in the following
cases.
(1) PS: If Color Matching is set
OFF.
(2) PS: If any setting other
than ASIC Color Matching is
set.
(3) PS: CMYK data when Ink
Simulation Mode is used (valid
in any other cases except Case
(1) and Case (2) above as long
as data is RGB).
(4) PCL binary data (Color/
Monochrome).
Mono-
Print
Speed
Auto
Color Speed
Normal Speed
High Quality Sets the monochrome print
speed. Prints at the most
appropriate speed for page
process if Auto is set.
Prints always at the color print
speed if Color is set.
Prints always at the
monochrome print speed if
Normal is set.
Prints always at 26ppm of the
gradation print speed for both
color and monochrome print if
High Quality is set.
Default
Orientatio
n
Portrait
Landscape Specifies print orientation.
Not valid for PS (valid only for
PCL/ IBMPPR/EPSONFX/ HP-
GL2).
ITEM SETTINGS EXPLANATION