Omega OMA-P1104 - Manual (Page 29)

Chapter 3: Quick Start
15
Chapter 3: Quick Start
This section presents a useful guide for first-time programming
of the OMA-P1104. Follow instructions for installation before
attempting to program the OMA-P1104. Refer to
Chapter 2: Installation.
3.1 The Local Keypad
Programming is accomplished using the local keypad (shown
below, Figure 3-1). Notice that a single key has several func-
tions assigned to it; programming results are determined by
the order in which keys are pressed.
Individual keystrokes are illustrated to show programming
steps in the correct order. If you make a mistake by entering the
wrong key, do not press another key until you hear the message,
“Error 1.” Then, start over with the first key in the
programming sequence.
Figure 3-1. The OMA-P1104 Keypad