Oki 59502 - Manual (Page 108)

|
OKIFAX 5750/5950 108
Memory Polling (Bulletin)
During Memory Polling (Bulletin), remote machine(s)
contact your fax machine and request (poll) documents. The
documents are stored in specified personal mailboxes. The
remote machine(s) continue the request(s) until all stored
documents in the specified mailboxes have been retrieved.
To use bulletin polling, you must
1 Create Personal (Bulletin Polling) Mailboxes.
2 Provide the Personal (Bulletin Polling) Mailbox address
(number) to the machine requesting documents. For
your machine, the address is the number (1 to 16) of the
mailbox.
! Memory Polling (Bulletin) and Confidential Faxing
share the same 16 mailboxes.
Memory Polling (Bulletin) allows any number of remote
machines to contact your machine. The remote
machines can retrieve the document as many times as
needed.
Memory Polling (Bulletin) is designed to be repeated,
by multiple remote machines.
Create a Polling Mailbox
1
Press Menu/Exit key to enter Menu.
2 Input speed access no. 03, wait.
3 Enter the personal box number (1-16), press Enter.
4 Press
ᮢ or ᮡ to select Bulletin Polling, press Enter.
5 Repeat steps 3 and 4 until the desired number of bulletin
polling mailboxes has been created (up to 16).
6 Press Menu/Exit to return to standby mode.
Set Bulletin Polling
1
Press Menu/Exit to enter the menu.
2 Press
ᮢ to select Polling TX/RX, press Enter.
3 Press Enter to select Polling TX.
4 Press Enter to select Bulletin Poll (Box).
5 Input personal mailbox numbers (1-16), press Enter after
inputting each mailbox number.
6 When finished inputting mailbox numbers, load the
document(s).
7 The document(s) will be scanned and stored in memory,
Bulletin Msg. in Mem displays.
! Memory Polling (Bulletin) and Confidential Faxing
share the same 16 mailboxes.