Oki 59502 - Manual (Page 74)

|
OKIFAX 5750/5950 74
Setting a Closed Network
1 Press Menu/Exit to enter the menu.
2 Input speed access number 21 (Closed Network); wait.
3 When Closed Network displays, press ᮢ or ᮡ to select
a setting, press Enter.
4 Press Menu/Exit to return to standby mode.
Power Failures
A battery in your fax machine prevents the loss of data stored
in memory at the time of a power outage.
Typical memory-backup time with a fully charged battery is
72 hours.
If data is in memory when power is restored, the machine
continues operations from the point when power was lost.
If the data in memory is lost when power is restored, the
Power Outage Report prints.
Power Outage Report
Use this report to determine which received messages you
may have lost, and which transmissions you may have to
resend.
For more information, refer to “Basic Faxing, Receiving
Messages to Memory.”
Display Messages
Here are some of the messages you may see during a typical
fax transmission.
(location)
The remote location’s Personal ID, TSI/CSI, Location ID or
the telephone number you entered will identify the location
during transmission.
CALLING
The line is ringing.
SENDING
The machine is transmitting a fax.
RESULT – OK
The fax was sent successfully.
COMMUN. ERROR
If you see this or another error message, a problem occurred
during the communication. Try resending the fax. For more
information, see “Problem Solving.”