Orion 2xx - Manual (Page 31)

28 46-649 Jupiter Magnetostrictive Transmitter - F OUNDATION fieldbus™
5.5 Model Numbers
5.5.1 Enhanced Jupiter Magnetostrictive Transmitter
2 Enhanced Jupiter Magnetostrictive
TRANSMITTER TYPE
See page 29
MOUNTING CONNECTION
See page 29
FLOAT
See page 30
INSERTION LENGTH
4 LCD display, 4–20 mA & HART, SIL 1
5 LCD display & F OUNDATION Fieldbus ™
6 LCD display, 4–20 mA & HART, SIL 2
➀
7 Interface transmitter, 4–20 mA & HART, with LCD display, 2 floats
8 Interface transmitter, F OUNDATION Fieldbus, with LCD display, 2 floats
OUTPUT
D Direct Insertion, Construction codes 1 through 7
E Top Mount, Construction code 1
F Top Mount Offset, Construction code 1
G Top Mount Offset, high-temperature bend, Construction code 7
H Bottom Mount Offset, Construction code 1
J Bottom Mount Offset, high-temperature bend, Construction code 7
CONFIGURATION (see drawings on page 34)
E Inches
M Centimeters
PROBE UNITS
1 316/316L SS (standard), +250° F (+120° C) Maximum (Direct Insertion +200° F (+95°))
7 316/316L SS (high temperature) +500° F (+260° C) Maximum
➁
2 Hastelloy ® C, +200° F (+95° C) Maximum
➂
3 Monel ® , +200° F (+95° C) Maximum
➂
5 Electropolished 316/316L SS, +200° F (+95° C) Maximum
➂
6 Sanitary 316/316L SS, +200° F (+95° C) Maximum
➂
MATERIALS OF CONSTRUCTION
1 Cast Aluminum, Integral Mount with 3 ⁄
4
" NPT Conduit Entry FM, EP, NI & IS
2 Cast Aluminum, Integral Mount with M20 Conduit Entry FM, EP, NI & IS
3 316 SS, Integral Mount with 3 ⁄
4
" NPT Conduit Entry FM, EP, NI & IS
4 316 SS, Integral Mount with M20 Conduit Entry FM, EP, NI & IS
A Cast aluminum, Integral Mount with 3 ⁄
4
" NPT conduit entry ATEX, EEx d
B Cast aluminum, Integral Mount with M20 conduit entry ATEX, EEx d
C 316 SS, Integral Mount with 3 ⁄
4
" NPT conduit entry ATEX, EEx d
D 316 SS, Integral Mount with M20 conduit entry ATEX, EEx d
E Cast aluminum, Integral Mount with 3 ⁄
4
" NPT conduit entry ATEX, EEx ia
F Cast aluminum, Integral Mount with M20 conduit entry ATEX, EEx ia
G 316 SS, Integral Mount with 3 ⁄
4
" NPT conduit entry ATEX, EEx ia
H 316 SS, Integral Mount with M20 conduit entry ATEX, EEx ia
HOUSING MATERIAL, MOUNTING AND CONDUIT ENTRY
2
➀
The bottom 3 inches of SIL 2
direct insertion probes are
inactive. The inactive area is
used to detect float failure.
➁
Consult factory for process
temperatures of 500°–850° F
(260°–455° C)
➂
Direct insertion model only.
Consult factory for process
temperatures above +200° F
(+95° C)