Onkyo HT-R640 - Manual (Page 53)

53
Listening to the Radio —Continued
Setting the Satellite Radio Mode
Selecting XM Satellite Radio
Signing Up for XM Satellite Radio
Before you can use XM Satellite Radio, you must first
sign up for an account. You’ll need a major credit card
and your XM Satellite Radio ID, which you can get from
the AV receiver, as explained below, or from the Passport
System package and itself.
Notes:
• Channel 0 cannot be selected in Category Search
mode. You must select Channel Search mode (see
page 54).
• The following letters are not used in XM Satellite
Radio IDs: I, O, S, F.
1 On the AV receiver, press the
[SETUP] button.
2 Use the TUNING Up or Down
[
]/[ ] buttons to select
“7. Hardware Setup,” and then
press [ENTER].
3 Use the TUNING Up or Down [ ]/
[ ] buttons to select “SAT
Radio,” and then use the PRESET
[
]/[ ] buttons to select “XM.”
Pressing the PRESET [ ]/[ ] but-
tons cycles through the following SAT
options: None
↔ XM.
None: Select if you are not using sat-
ellite radio.
XM: Select to use XM satellite
radio.
4 Press the [SETUP] button.
Press the [TUNER] input selector
button repeatedly to select XM.
If “CHECK ANTENNA” appears on
the display, make sure the XM Passport
System is connected properly.
TUNER SETUP
TUNING , PRESET , ENTER
SETUP
TUNING PRESET
ENTER
7.Hardware Setup
------------------------
a.SAT Radio : None
b.Remote ID :1
c.HDMI Audio Out :Off
d.SW Input Sensitivity
: 0dB
TUNING PRESET
ENTER
TUNING PRESET
TUNER
1 Use the TUNING Up and Down
[
]/[ ] buttons to select
channel 0.
Your XM Satellite Radio ID number is
displayed. Write it below.
ID
2 To sign up, go to:
http://activate.xmradio.com
Or call: 1-800-967-2346
For XM Canada, go to:
http://xmradio.ca
Or call: 1-877-GET-XMSR
TUNING PRESET