Onkyo HT-R640 - Manual (Page 56)

56
Listening to the Radio —Continued
Positioning the XM Passport System
You can check the signal strength of the XM radio signal
and adjust the position of the XM Passport System
accordingly.
XM Radio Messages
The following messages may appear while using XM
radio.
The XM Passport System is not connected properly.
Check the connection.
The XM user encryption code is being updated. Please
wait.
The signal is too weak. Check the XM Passport System
connection and reposition it for the best reception.
The AV receiver is tuning or decoding audio or text data.
Please wait.
The XM channel you selected is not currently broadcast-
ing. Select another channel.
1 Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
2 Use the Up and Down [ ]/[ ]
buttons to select “5. Input
Setup,” and then press [ENTER].
The Input Setup menu appears.
3 Adjust the position of the XM
Passport System so that the SAT/
TER signal strength bar is as
long as possible.
MUTING
PREVIOUS
MENU
GUIDE
TOP MENU
SETUP RETURN
PLAYLIST/CAT PLAYLIST/CAT
T V VOL VOL
INPUT
ENTER
CH
DISC ALBUM
TAPE/AMP
M D/CDR
HDD
STANDBY/ON
INPUT SELECTOR
REMOTE MODE
V 1
V 4
V 2 V 3
CD TAPE TUNER
DVD MULTI CH
VCR
T V
DVD RECEIVER
C D 1 2 3
4 5 6
7 8 9
RECEIVER
SETUP
ENTER
SETUP
RECEIVER
5.Input Setup
---------TUNER----------
a.IntelliVolume:+12dB
Listening Mode Preset
b.Analog :Last Valid
Antenna Aiming( XM )
SAT[ ----]
TER[ ----]
Terrestrial (TER) signals are only avail-
able in certain areas.
So long as the signal strength is good,
you can enjoy XM Radio by using
either satellite or terrestrial reception.