Onkyo HT-R640 - Manual (Page 54)

54
Listening to the Radio —Continued
Selecting XM Radio Channels
There are three ways to select XM radio channels:
• Channel Search mode: select any channel.
• Category Search mode: select channels by category.
• Direct tuning: enter channel number.
Note:
You can’t select Channel Search or Category Search
mode, while the Tuning Arrow
indicators are
flashing, as tuning is in progress.
■
Channel Search Mode
■
Category Search Mode
■ Direct Tuning
You can select an XM radio channel directly by entering
its number.
1 Press the [RECEIVER] button,
followed by the [ENTER] button
to select “Channel Search”
mode.
2 Use the Up and Down [ ]/[ ]
buttons to select a channel.
You can also use the Left and Right
[
]/[ ] buttons to select a category.
MUTING
PREVIOUS
MENU
GUIDE
TOP MENU
PLAYLIST/CAT PLAYLIST/CAT
--/---
TAPE/AMP
M D/CDR
HDD
CABLE
STANDBY/ON
DIMMER
ENT D TUN
SLEEP
10 11 12
INPUT SELECTOR
REMOTE MODE
V 1
V 4
V 2 V 3
C D TAPE TUNER
DVD MULTI CH
T V VOL VOL
SAT
VCR
T V
DVD RECEIVER
C D
INPUT
+10 0 CLR
1 2 3
4 5 6
7 8 9
ENTER
CH
DISC ALBUM
RETURN
ENTER
D TUN
RECEIVER
SETUP RETURN
ENT
Number
buttons
Channel name Channel number
1 Press the [RECEIVER] button,
followed by the [ENTER] button
to select “Category Search”
mode.
2 Use the Left and Right [ ]/[ ]
buttons to select a category, and
use the Up and Down [
]/[ ]
buttons to select a channel in
that category.
1 Press the [RECEIVER] button,
followed by the [D TUN] button.
The [RECEIVER] button flashes.
2 Within 8 seconds, use the num-
ber buttons to enter the channel
number.
The channel is selected.
For example, to select channel #20,
press 0, 2, 0, or 2, 0, [ENT].
Note: While the [RECEIVER] button is
flashing, the input source cannot be
changed by using the remote controller.
D TUN
DIMMER
ENT
SLEEP
11 12
V 1
V4
V 2 V 3
C D TAPE TUNER
DVD MULTI CH
0 CLR
1 2 3
4 5 6
7 8 9