Advanced setup, Advanced speaker settings, Speaker distance – Onkyo HT-R640 User Manual

Page 63: Repeat step 4 for all speakers, Press the [setup] button. the setup menu closes

Advertising
background image

63

Advanced Setup

Speaker Distance

Here you can specify the distance from each speaker to
the listening position so that the sound from each
speaker arrives at the listener’s ears as the sound
designer intended.

Notes:
• The Center and Subwoofer distances can be set up to

5 ft. (1.5 m) more or less than the Front distance. For
example, if the Front distance is set to 20 ft. (6 m), the
Center and Subwoofer distances can be set between
15 and 25 ft. (4.5 and 7.5 m). The Surr Right and Surr
Left distances can be set up to 5 ft. (1.5 m) more or
15 ft. (4.5 m) less than the Front distance. For exam-
ple, if the Front distance is set to 20 ft. (6 m), the Surr
Right and Surr Left distances can be set between 5 and
25 ft. (1.5 and 7.5 m).

• This procedure can also be performed on the AV

receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.

Advanced Speaker Settings

1

Press the [RECEIVER] or [AMP]
button followed by the [SETUP]
button.

The main menu appears onscreen.

2

Use the Up and Down [

]/[

]

buttons to select “2. Speaker Dis-
tance,” and then press [ENTER].

The Speaker Distance menu appears.

Note:
Speakers that you set to No or None on
the Speaker Configuration page
(page 42) cannot be selected.

MUTING

PREVIOUS

MENU

GUIDE

TOP MENU

SETUP

RETURN

PLAYLIST/CAT

PLAYLIST/CAT

--/---

TAPE/AMP

M D/CDR

HDD

CABLE

STANDBY/ON

DIMMER

ENT

D TUN

SLEEP

10

11

12

INPUT SELECTOR

REMOTE MODE

V

1

V

4

V

2

V

3

C D

TAPE

TUNER

DVD

MULTI CH

T V

VOL

VOL

SAT

VCR

T V

DVD

RECEIVER

C D

INPUT

+10

0

CLR

1

2

3

4

5

6

7

8

9

ENTER

CH

DISC

ALBUM

1, 6

2-4

2

1

RECEIVER

AMP

SETUP

2.Speaker Distance
------------------------
a.Unit :meters
b.Front : 3.6m
c.Center : 3.6m
d.SurrRight : 2.1m
e.SurrLeft : 2.1m
f.Subwoofer : 3.6m

3

Use the Up and Down [

]/[

]

buttons to select “a. Unit,” and
then use the Left and Right [

]/

[

] buttons to select:

feet: Select if you want to enter

distances in feet. Can be set
from 1 to 30 feet in 1-foot
steps.

meters: Select if you want to enter

distances in meters. Can be
set from 0.3 to 9 meters in
0.3-meter steps.

4

Use the Up and Down [

]/[

]

buttons to select “b. Front,” and
then use the Left and Right [

]/

[

] buttons to specify the dis-

tance.

Specify the distance from the front left
speaker to your listening position.

5

Repeat step 4 for all speakers.

6

Press the [SETUP] button.

The setup menu closes.

SETUP

Advertising