Oki 4M - Manual (Page 76)

6 - 5
Status
Code
Category Status Message Display Content Remedy
Table 6-1 (Cont'd)
Device configuration error 60 40
60 60
60 80
60 90
60 91
60 92
60 C0
An error occurred during EEPROM check.
An error occurred during option RAM check.
A heater timeout error occurred.
A thermistor error occurred.
The thermistor is open.
A thermistor short occurred.
A watchdog timeout occurred.
Replace the main control board. (When replacing the main
control board, also adjust EEPROM data.) (See Section
4.2.4.)
Check the connection of the Option RAM PC board. If the
option RAM PC board is faulty, replace it.
See Section 6.5.2 4.
Replace the thermistor of the heater Assy.
Replace the thermistor of the heater Assy.
Replace the thermistor of the heater Assy.
To release the error display, turn on the power supply again.
Replace the main control board.
Status
Code
Category Status Message Display Content Remedy
EEPROM Check Error
Option RAM Check Error
Fuser Error
Thermistor Error
Thermister Open Check Error
Thermister Short Check Error
Watch Dog Timeout Error