Index to parts and controls, Rear panel, 2 mon out [12 – Onkyo TX-L5 User Manual
Page 10: 4 z (remote control) [18, 5 sub woofer pre out [15, 7 surround speakers l/r, center speaker [15, 8 front speakers l/r [15
10
SN 29343138 TX-L5.E
Index to Parts and Controls
For operational instructions, refer to the page indicated in brackets.
■ Rear panel
R
L
FRONT SPEAKERS
SURROUND
SPEAKERS
CENTER
SPEAKER
R
L
ANTENNA
AM
FM 75
REMOTE
CONTROL
S VIDEO
SUB
WOOFER
PRE OUT
MON OUT
VIDEO
IN
IN
OUT IN
IN
OUT
IN
IN
DVD/CD
MON
OUT
DVD/CD
L
R
IN
AUDIO
VIDEO 1
VIDEO 2
MD/TAPE
OUT
IN
OUT
IN
OUT
IN
IN
HD
DVD/CD
L
R
VIDEO 1
VIDEO 2
VIDEO 2
VIDEO 1
DIGITAL INPUT
(OPTICAL)
(COAXIAL)
VIDEO 2
DVD
HD
(OPTICAL)
AV RECEIVER
MODEL NO.
TX-L5
1
2
4
3
5
6
7
8
9
0
1 VIDEO (DVD/CD IN / VIDEO 1 OUT/IN / VIDEO 2 IN) [13]
There are 3 video inputs and 1 output. Connect DVD players, LD
players, VCRs or other video components to the video inputs. The
video output channel can be used to be connected to video tape
recorder for making recordings.
2 MON OUT [12]
The monitor output includes both RCA type and S video
configurations. This output is for connecting television monitors or
projectors.
3 S VIDEO (DVD/CD IN / VIDEO 1 OUT/IN / VIDEO 2 IN)
[13]
There are 3 video inputs and 1 output. Connect DVD players, LD
players, VCRs or other video components to the video inputs. The
video output channel can be used to be connected to video tape
recorder for making recordings.
4 z (REMOTE CONTROL) [18]
Connect the Onkyo components that have z connectors such as a
CD player, and cassette tape deck using the z cables provided
with them. When these components are interconnected, they can be
controlled from the remote controller provided with the TX-L5.
After connecting the z connectors, check the operation of the
remote controller buttons for use in controlling other components
(refer to page 27).
• The z connectors are only effective if they are used in
conjunction with an Onkyo amplifier with an z connector. Do not
connect to a component other than Onkyo component with an z
connector. Doing so may damage the TX-L5.
• Connecting z cable only does not make the system operational.
You must also connect the audio cables as well.
• If the connected component has two z connectors, you can use
either one to connect to the TX-L5. The other one can be used to
daisy chain with another component.
5 SUB WOOFER PRE OUT [15]
This terminal is for connecting an active subwoofer.
6 DIGITAL INPUT (DVD, HD (OPTICAL), VIDEO 2 (COAXIAL))
[12, 13]
These are the digital audio inputs. There are 2 digital inputs with
optical jacks and 1 with a coaxial jack. The inputs accept digital
audio signals from DVD players, hard disk recorders, CD players, or
other digital source component.
7 SURROUND SPEAKERS L/R, CENTER SPEAKER [15]
Speaker terminals are provided for the center, surround left and
surround right speakers.
8 FRONT SPEAKERS L/R [15]
Speaker terminals are provided for the front left, front right speakers.
Speaker outputs are compatible with banana plug connectors (other
than European models).
9 AUDIO L/R (DVD/CD IN / VIDEO 1 OUT/IN / VIDEO 2 IN /
HD OUT/IN / MD/TAPE OUT/IN) [12, 13]
These are the analog audio inputs and outputs. There are 5 audio
inputs and 3 audio outputs. The audio inputs and outputs require
RCA type connectors.
When connecting a VCR or other video component, make sure you
connect the audio and video leads together (i.e., both to VIDEO 1).
0 ANTENNA [16, 17]
These terminals are for connecting the FM antenna and AM
antenna.