Onkyo TX-L5 - Manual (Page 20)

20
SN 29343138 TX-L5.E
You need to setup the speaker configuration for the
speaker system connected to the SPEAKER teminals.
It is not necessary to set the parameters again once you
have completed the setup unless you change the speaker
configuration.
Note
Speakers setup cannot be done if headphones are connected.
Speaker Setup
Selecting the number of speaker
channels
Press SP SETUP repeatedly to
select the number of channels
within 3 seconds.
The normal display resumes in 3 seconds
Notes
• The listening mode will automatically
change according to the number of
channels if you set the number of channels.
• With the first press of SP SETUP, you can
check the present setting. Then each press
of the button changes the number of
channels.
Display and number of speaker channels
SP SETUP
Speaker 5ch
Speaker 2ch
Speaker 3ch
Speaker 4ch
Front left
Front right
Center
Surround left Surround
right
DISPLAY VIDEO 2 VIDEO 1 DVD/CD
DIMMER
HD TUNER MD/TAPE
DVD MD
STANDBY ON
MENU TOP MENU
SETUP
SURR MODE
TEST TONE
DISTANCE LATE NIGHT A.CTRL MUTING
VOLUME
CH SEL
STEREO SP SETUP SW MODE
RETURN
REMOTE CONTROLLER RC- 453S
PR ESET
PLAY
SLEEP
INPUT SELECTOR
DVD MD
Control
ENTER
SW MODE
SP SETUP
SUBWOOFER MODE
SW MODE
Setting the Subwoofer Mode
Press SUBWOOFER MODE on the
unit or SW MODE on the remote
controller.
With the first press of the button, you can
check the present setting. Then each
press of the button changes the subwoofer
mode as follows (a tip on how to select the
right subwoofer mode is in parentheses):
→ SUBWOOFER OFF
(When no subwoofer is connected)
↓
SUBWOOFER MODE 1
(When you want to enhance the super
bass)
↓
SUBWOOFER MODE 2
(When you want to lower the super
bass)
The normal display resumes in three
seconds.
Unit
Remote controller
SUBWOOFER MODE SURROUND STEREO
ON
STANDBY
POWER
STANDBY / ON
ON OFF
PHONES ACOUSTIC
CONTROL TUNING/PRESET
DVD / C D VIDEO 1 VIDEO 2 H D MD / TAPE
FM AM
INPUT
VOLUME
AV RECEIVER TX-L 5
MEMORY FM MODE
SUBWOOFER MODE