Onkyo TX-L5 - Manual (Page 24)

24
SN 29343138 TX-L5.E
Selecting Preset Stations
Before selecting preset stations, you need to preset the radio
stations. See “Presetting Radio Stations” on the left column of
this page.
Press TUNER on the remote
controller or rotate the INPUT dial
on the unit to switch the input
source to the tuner.
“FM” or “AM” appears in the display.
The band selected in this step will not
affect the next step.
Press PRESET 5/∞ on the remote
controller or TUNING/PRESET
™/£ on the unit repeatedly to
select the preset number of the
desired radio station.
Note
If you press TUNING/PRESET ™/£ on the
unit for more than 1.5 seconds, the unit enters
the manual tuning mode. See step 2 in “Tuning
Manually” on the previous page.
1
2
Unit
SUBWOOFER MODE SURROUND STEREO
ON
STANDBY
POWER
STANDBY / ON
ON OFF
PHONES ACOUSTIC
CONTROL TUNING/PRESET
DVD / C D VIDEO 1 VIDEO 2 H D MD / TAPE
FM AM
INPUT
VOLUME
AV RECEIVER TX-L 5
MEMORY FM MODE
TUNING/PRESET ™/£ MEMORY
FM MODE
INPUT
PR
ESET
TUNING/PRESET
DISPLAY VIDEO 2 VIDEO 1 DVD/CD
DIMMER
HD TUNER MD/TAPE
DVD MD
STANDBY ON
MENU TOP MENU
SETUP
SURR MODE
TEST TONE
DISTANCE LATE NIGHT A.CTRL MUTING
CH SEL
STEREO SP SETUP SW MODE
RETURN
PR ESET
PLAY
SLEEP
INPUT SELECTOR
DVD MD
Control
ENTER
TUNER
PRESET 5/∞
TUNER
Presetting Radio Stations
You can preset up to 30 stations.
Tune in the radio station you wish
to preset (refer to the previous
page).
Press MEMORY.
The MEMORY indicator lights and the
preset number starts flashing in the
display.
While the MEMORY indicator is lit
(for about 8 seconds), press
TUNING/PRESET
™/£ to select
the preset number.
Press MEMORY.
The radio station is registered to the preset
channel.
To register another preset station, repeat
steps 1 to 4.
Note
When you preset either FM station or AM station only, you cannot
switch the band to another band (for example AM to FM) with the
remote controller. Turn INPUT dial to select the band.
1
2
3
4
MEMORY
TUNING/PRESET
MEMORY
INPUT dial
Remote
controller
Remote
controller
Unit
Listening to the Radio