Onkyo TX-L5 - Manual (Page 22)

22
SN 29343138 TX-L5.E
Speaker Setup
Adjust each speaker’s relative volume balance so that the
volumes of all speakers’ test tones sound equal at the
listening position.
Note
You cannot adjust the volume balance while the muting function is
activated.
Press TEST TONE.
Each speaker emits the test tone (pink
noise) and the display shows the speaker
emitting the test tone in the following
order:
LEFT → CENTER
(Front left) (Center)
↑ ↓
SUBWOOFER RIGHT
(Subwoofer) (Front right)
↑ ↓
SURR LEFT ← SURR RIGHT
(Surround left) (Surround right)
Notes
• No test tone will be emitted from the
speaker which is not included in the
speaker configuration on page 20 even if it
is actually connected.
• No test tone will be emitted from the
subwoofer when the subwoofer mode is set
to “SUBWOOFER OFF”.
1 2
3
Press CH SEL repeatedly to select
the speaker, then press
5/∞ to
adjust the volume level.
The volume level can be adjusted between
–12dB and +12dB.
When you have completed the
adjustment by repeating step 2,
press TEST TONE.
The test tone stops and the normal display
resumes.
Note
Even if you don’t press TEST TONE, the test
tone will stop after 2 minutes.
TEST TONE
CH SEL
«
TEST TONE
Adjusting Each Speaker's Relative Volume Balance – Test Tone
DISPLAY VIDEO 2 VIDEO 1 DVD/CD
DIMMER
HD TUNER MD/TAPE
DVD MD
STANDBY ON
MENU TOP MENU
SETUP
SURR MODE
TEST TONE
DISTANCE LATE NIGHT A.CTRL MUTING
VOLUME
CH SEL
STEREO SP SETUP SW MODE
RETURN
REMOTE CONTROLLER RC- 453S
PR ESET
PLAY
SLEEP
INPUT SELECTOR
DVD MD
Control
ENTER
2 1, 3
2