Oreck 550 - Manual (Page 9)

E N G L I S H
Light Cleaning
Equipment and Material Required:
• Orbiter ® Multi-Floor Machine
• White Terrycloth Bonnet
• Grunge Attack
® Tile Floor Cleaner
Procedure:
Grunge Attack
® Tile Floor Cleaner lifts dirt, grime and
grease from tile floors and grout, leaving sparkling results.
1. Dilute Grunge Attack ® Tile Floor Cleaner according to
the instructions on the bottle.
2. Lightly spray a 6 ft by 6 ft area with Grunge Attack ®
Tile Floor Cleaner.
3. Clean with the Orbiter ® Multi-Floor Machine and
white terrycloth bonnet. This bonnet is designed to lift
and remove dirt from hard surfaces.
See Grunge Attack ® Cleaner bottle for complete instruc-
tions.
Stone Floor Applications
Deep Cleaning
For cleaning all types of stone floors, including marble,
granite, slate and other stone floors.
Equipment and Material Required:
• Orbiter ® Multi-Floor Machine
• Tan Polish Brush (Union Mix)
• Stone Clear Bottom
® Stone Floor Cleaner
• Vacuum, Broom or Dust Mop
• Mop and Bucket
Procedure:
Stone Clear Bottom
® Stone Floor Cleaner is a pH neutral
balanced daily cleaner designed to safely clean all stone
surfaces without damaging the stone’s natural crystalline
surface.
1. Clean the floor with vacuum, broom or dust mop to
ensure that all grit is removed.
2. Dilute Stone Clear Bottom ® Stone Floor Cleaner
according to the instructions on the bottle.
3. To clean stone floors and grout, use the Orbiter ®
Multi-Floor Machine and the tan polish brush (union
mix).
4. To remove dirt and grime lifted by the brush, mop
floors with clean water or with Stone Clear Bottom ®
Cleaning Solution.
See Stone Clear Bottom ® bottle for complete instructions.
Marble Restoration
Michaelangelo’s Marble Restorer ® polishing cream is a
unique blend of microabrasives that safely restores the
stone’s natural crystalline structure to rejuvenate the shine
the marble once had. It will safely and effectively revive
dull marble surfaces, light surface scratches, abrasions,
etch marks, shower wall streaks, water marks, and glass
rings.
Equipment and Material Required:
• Orbiter ® Multi-Floor Machine
• Black Drive Pad Holder
• Beige Marble Pad
• White Poilsh Pad
• Stone Clear Bottom
® Stone Floor Cleaner
• Lamb’s Wool Bonnet (optional)
• Michaelangelo’s Marble Restorer
® Polishing Cream
• Vacuum, Dust Mop or Broom
• Mop & Bucket
• Squeegee
Procedure:
1. Clean the floor with vacuum, broom or dust mop to
ensure that all grit has been removed. All topical
coatings need to be removed.
2. Spray water on the floor and then apply a dab
(2 in diameter) per 16 sq ft of surface of
Michaelangelo’s Marble Restorer
® polishing cream.
Using Orbiter ® Multi-Floor Machine and beige
marble pad, begin buffing the area. Buff for five or
more passes, keeping the product in a wet slurry. Do
not let the product dry on the floor, and spray
additional water if necessary.
3. Check results by moving the slurry with a squeegee.
Reapply or continue to buff if necessary. Remove
slurry with squeegee, wet/dry vacuum or clean mop.
4. Immediately mop the floor with a mix of 2 oz of
Stone Clear Bottom ® Stone Floor Cleaner and
1 gallon of water, making sure all of the
Michaelangelo’s Marble Restorer
® has been removed
from the floor.
5. Let the floor dry completely. Buff the floor with an
Orbiter ® Multi-Floor Machine and a white polish pad.
See Michaelangelo’s Marble Restorer ® bottle for complete
instructions.
9