Optiview TRKPTZ -26NX - Manual (Page 14)

Auto Zooming Tracking Dome Camera User Manual
13
dome will calls these parameters saved in memoriy and adjust
Pan/Tilt/Zoom of the camera to that position.
Extended Presets
Note: For others dynamics controllers with only 64 or 40
presets. On the menu of PRESETS NUMBER, set it as 64 or 40.
Then you can use presets listed in
„Presets 2‟ in stead.
(5) Zoom: You can press IN or OUT key continuously or
revolve the joystick to get desired zooming times.
(6) Focus: press FAR or NEAR key.
(7) Iris: Press OPEN or CLOSE key.
Section 3 Menu Configuration
You need to install the dome system before using this
Presets 1 Function Presets 2
80
Auto tracking
37
82
Auto switch sequentially among preset
positions
19
83 Clear all presets positions 20
95 Select main programming menu 28
97 Random scanning 30
98 Frame scanning 31
99 Start auto scanning 32