Optiview TRKPTZ -26NX - Manual (Page 35)

Auto Zooming Tracking Dome Camera User Manual
34
A zone is pan area, defined by a left and right limit on the
360-degree pan plane. There are altogether eight zones, each
can be with a 6-character label.
TO program a zone:
(1) Move joystick to position the cursor beside ZONE
NUMBER. Press iris Open.
(2) Move the joystick up or down to view selections. Press
iris Open to confirm selection.
(3) Move joystick to position the cursor beside EDIT ZONE.
(4) Press iris Open. The Zone programming window will
show on the monitor.
(5) Follow the directions displayed on the monitor. After the
left stops and right limit stops are set, the Zones menu reappears
with the ZONE ENABLED option set to be ON.
To edit a zone label:
(1) Move joystick to position the cursor beside EDIT ZONE
LABEL.
(2) Press iris Open. It will show as follows:
Figure 3.15 ZONE SETTING
ZONE NUMBER 1
ZONE LABLE 1 - - - - -
0 1 2 3 4 5 6 7 8 9 Y Z y z
A B C D E F G H I J K L M N O P Q R S T U V W X
a b c d e f g h I j k l m n o p q r s t u v w x
INPUT MODE CHARACTER
OK CN SP BP