Optiview TRKPTZ -26NX - Manual (Page 27)

Auto Zooming Tracking Dome Camera User Manual
26
change the value, the color changes on your monitor.
3.5.3 Motion Setting
Move joystick to select <MOTION >, press Open to enter the
motion menu shown as Fig3.9.
FIGURE 3.9 MOTION MENU
AUTO FILP:
When the dome camera tilts downward and goes just
beyond the vertical, the dome camera rotates 180 degrees
automatically. Afterwards, the dome camera starts moving
upward even you still hold joystick in the down position. Once
you let go of the joystick after the dome rotates, joystick control
returns to normal operation. The auto-flip feature is useful for
following a person who passes directly beneath the dome.
There are two auto flip modes:
ON (default): Auto flip mode enabled.
OFF: Auto flip mode disabled.
MOTION
AUTO FLIP ON/OFF
PROPORTIONAL PAN ON/OFF
PARK TIME（MINUTES） 0
PARK ACTION NONE
SCAN SPEED（DEG/S） 1
< SET SCAN>
< MANUAL LIMIT>
< SET AZIMUTH ZERO>
< CLEAR AZIMUTH ZERO>
BACK
EXIT