Optiview TRKPTZ -26NX - Manual (Page 33)

Auto Zooming Tracking Dome Camera User Manual
32
(3) Edit preset scene:
a. Move joystick to position the cursor beside EDIT
PRESET SCENE.
b. Press iris Open.
c. Follow the direction displayed on the monitor.
(4) Clear a preset:
a. Move joystick to position the cursor beside CLEAR
PRESET.
b. Press iris Open.
c. Follow the direction displayed on the monitor.
3.5.6 Patterns Setting
Use stick to select <patterns> Open to enter the patterns
menu shown as Fig3.13.
Figure 3.13 PATTERNS
PROGRAME PATTERN:
A pattern is function that the camera can save its moving
course, and will repeat that course when demanded.
To program a pattern:
(1) Move joystick to position the cursor beside PATTERN
NUMBER, and then press iris Open.
PATTERNS
PATTERN NUMBER 1
<PROZGRSM PATTERN>
<CLEARE PATTERN>
BACK
EDIT