Optiview TRKPTZ -26NX - Manual (Page 31)

Auto Zooming Tracking Dome Camera User Manual
30
This setting defines a specific activity (scan, preset, pattern)
to be performed after the dome is powered up.
Following settings are available:
NONE (default): No action.
AUTO SCAN: Dome starts auto scan operation.
RANDOM SCAN: Dome starts random scan operation.
FRAME SCAN: Dome starts frame scan operation.
PRESET 1: Dome goes to preset 1.
PRESET 8: Dome goes to preset 8.
PATTERN 1:Dome runs pattern 1.
PATTERN 2:Dome runs pattern 2.
PATTERN 3:Dome runs pattern 3.
PATTERN 4:Dome runs pattern 4.
3.5.5 Presets Setting
Move joystick to select <PRESETS>, press Open to enter
the presets menu shown as Fig3.11.
Figure 3.11 PRESET
The dome camera has 64 programmable preset positions.
Follow below steps to program a preset.
PRESETS
PRESET NUMBER 1
…PRESET NOT DEFINEO…
< EDIT PRESET LABEL >
< EDIT PRESET SCAENE >
< CLEAR PRESET >
BACK
EXIT