Connecting a cd player or turntable, Connecting the av controller —continued, Ba a c – Onkyo PR-SC886 User Manual
Page 41
41
■ CD Player or Turntable (MM) with Built-in Phono Preamp
• With connection
, you can listen to and record audio from the CD player or listen in Zone 2 or Zone 3.
• To connect the CD player digitally, use connection
or
. (To record or listen in Zone 2 or Zone 3 as well,
use
and ,
or
and .)
■ Turntable (MM) with no Phono Preamp Built-in
The AV controller’s PHONO IN is designed for use with
a moving magnet (MM) type cartridge.
Use an analog audio cable to connect the AV controller’s
PHONO IN L/R jacks to the audio output on your turn-
table.
Notes:
• If your turntable has a ground wire, connect it to the
AV controller’s GND screw. With some turntables,
connecting the ground wire may produce an audible
hum. If this happens, disconnect it.
• If your turntable has a moving coil (MC) type car-
tridge, you’ll need a commercially available MC head
amp or MC transformer. Connect your turntable to the
head amp or transformer, and connect that to the AV
controller’s PHONO IN L/R jacks.
• You can also use a phono equalizer to connect a turn-
table with an MC-type cartridge. See your phono
equalizer’s manual for details.
Connecting a CD Player or Turntable
Connection
AV controller
Signal flow
CD or turntable
CD IN L/R
⇐
Analog audio L/R output
DIGITAL COAXIAL IN 2 (VCR/DVR)
⇐
Digital coaxial output
DIGITAL OPTICAL IN 2 (CD)
⇐
Digital optical output
IN
L
R
L
R
CD
AUDIO
OUTPUT
OPTICAL
OUT
AUDIO
OUT
L
R
COAXIAL
OUT
L
R
IN
(VCR/DVR)
IN 2
COAXIAL
IN 2
(CD)
OPTICAL
CD
b
a
a
c
Step 1:
Choose a connection that matches your CD player (
,
, or
). Use connection
for a turntable with a built-in
phono preamp.
a
b
c
a
Turntable (MM) with
built-in phono preamp
CD player
Connect one
or the other
Connection
must be
assigned
(see page 53)
b
a
b
c
a
b
a
c
a
b
c
L
R
AUDIO
OUTPUT
PHONO
R
L
IN