Onkyo PR-SC886 - Manual (Page 75)

75
Using the Listening Modes
For a description of each listening mode, see “About the
Listening Modes” on page 82.
Selecting on the AV Controller
■ [PURE AUDIO] button
This button selects the Pure Audio listening mode.
When this mode is selected, the AV controller’s dis-
play is turned off and only video signals input
through HDMI IN can be output. Pressing this but-
ton again will select the previous listening mode.
■ [STEREO] button
This button selects the Stereo listening mode.
■ [THX] button
This button selects the THX listening modes.
■ LISTENING MODE [ ]/[ ] buttons
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
Selecting with the Remote Controller
■ [STEREO] button
This button selects the Stereo listening mode.
■ [SURR] button
This button selects the Dolby Digital and DTS listen-
ing modes.
■ LISTENING MODE [ ]/[ ] buttons
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
■ [PURE A] button
This button selects the Pure Audio listening mode.
When this mode is selected, the AV controller’s dis-
play is turned off and only video signals input
through HDMI IN can be output.
■ [DIRECT] button
This button selects the Direct listening mode.
■ [THX] button
This button selects the THX listening modes.
■ [ALL ST] button
This button selects the All Channel Stereo listening
mode.
Selecting the Listening Modes
• The Dolby Digital and DTS listening modes
can only be selected if your DVD player is
connected to the AV controller with a digital
audio connection (coaxial, optical, or HDMI).
• The listening modes you can select depends
on the format of the input signal. To check
the format, see “Displaying Source Informa-
tion” on page 66.
• While a pair of headphones is connected,
you can only select the Pure Audio, Mono,
Direct, or Stereo listening mode.
PURE AUDIO
STEREO
LISTENING MODE
THX
,
STEREO
PURE A
DIRECT THX
ALL ST
SURR