SEVERIN TO 2036 - Manual (Page 12)

may be selected.
Th
e switch settings (upper heat/lower –
heat) may be changed during the cooking
process.
Aft er the pre-programmed cooking time
–
has elapsed, the timer will automatically
switch off the heating elements.
To interrupt the cooking process
–
temporarily, set the 5-position switch to
the "z" position. However, it should be
noted that the timer function continues
during the interruption.
To switch off the appliance earlier, set the
–
timer to "0” and turn the 5-position switch
to the "z" position.
Always use the door handle to open the
–
hot door aft er use. When removing the
baking tray, use the tray handle provided.
Likewise, when removing the spit, the
spit handle must be used. To remove the
baking tray and, if necessary, the biscuit
tray with it, an oven cloth must be used.
Always place the baking tray on a heat-
resistant surface.
Aft er use, set the 5-position switch to the
–
"z" position and remove the plug from the
wall socket.
Cooking times
Th
e grilling/cooking times listed are
approximate times only, as each food
to be grilled or cooked is of a diff erent
nature and consistency; please also refer
to the information contained on the food
packaging.
Food
Temperature
/ setting
Grilling/
cooking
time
Chicken
(rotating spit) 200°C
60 mins.
Pizza (deep-
frozen) 200°C 12-14
mins.
Toast Hawaii
175°C 8-10
mins.
Baguette
(deep-frozen) 180°C 16-18
mins.
Cookies,
biscuits 175°C 15-17
mins.
Cakes, pastry
150°C 50-60
mins.
General care and cleaning
Before cleaning the appliance, ensure it is
z
disconnected from the power supply and
has completely cooled down.
To avoid the risk of electric shock, do not
z
clean the appliance with water and do not
immerse it in water.
Do not use abrasives, harsh cleaning
z
solutions or spray-type oven cleaners.
Th
e exterior of the housing may be cleaned –
with a damp, lint-free cloth.
Th
e baking tray, baking rack, biscuit tray, –
spit and holding clamps may be cleaned
using hot water and a mild detergent, or
in a dish-washer.
If necessary, the refl ector sheet may be
–
removed before cleaning. Make sure that
the refl ector sheet is fi tted in its proper
position underneath the heating elements
aft er cleaning.
Allow the pizza stone to cool down
–
completely before cleaning. Any
remaining food can be scraped off with
a wooden spatula. Because the surface is
porous, discoloration as a result of contact
with food is normal.
If the stone has been rinsed in water
during the cleaning process, ensure that
it has dried of completely before it is
used again. Only a completely dry stone
ensures best baking results.
Disposal
Do not dispose of old or defective
appliances in domestic garbage;
this should only be done through
public collection points.
Guarantee
Th
is product is guaranteed against defects
12