Quadra-Fire CASTINS-CSB - Manual (Page 9)

R
August 20, 2009 250-7251G Page 9
Castile Pellet Insert
A
C
B B
C
E
D
Fire Risk.
Comply with all minimum clearances
to combustibles as specifi ed.
WARNING
Failure to comply may cause house
fi re.
NOTE:
• Illustrations refl ect typical installations
and are FOR DESIGN PURPOSES
ONLY.
• Illustrations/diagrams are not drawn to
scale.
• Actual installation may vary due to
individual design preference.
B. Clearance To Combustibles, UL and ULC
Inches Millimeters
A Top of Hopper Top or Rear Vent 0 0
B Side of Outside Skin Top or Rear Vent 0 0
C Back of Hopper Top Vent 2.5 64
Rear Vent 0 0
D Vent Pipe to Combustible Top or Rear Vent 3.0 76
E Front Panel Edge Top or Rear Vent 0 0
INSTALLED AS A BUILT-IN UNIT
Shown Optional Outside Air
Figure 9.1
Figure 9.2
AS A BUILT-IN
0” (0mm) Clearance To Exposed Section And Face Trim
12 in
(305mm)
6 in
(153mm)
Outside
Air