Toshiba TX80 - Manual (Page 118)

118 File Transfer & Synchronisation
Using Infrared for Transferring Data
You can use infrared to exchange the Calendar data of your phone,
Contacts list entries of your phone, memory card or SIM card,
pictures/videos taken or recorded with the camera and Gallery data
that can be forwarded with an infrared compatible phone, PC or other
device. You can also restore or backup Gallery data.
The
indicator appears at the top of the display during transfer.
To transfer data between your phone and a PC, the supplied PC
management software My Mobile needs to be installed on the PC.
The infrared function of your phone complies with IrMC 1.1.
As shown in the illustration, bring your phone and an infrared
compatible device to within 20 centimetres of each other and point
both infrared ports directly towards each other. Do not place an object
between them.
For details on the operating procedures of the other device, refer to
the instruction manual for that device.
Using Infrared for Sending Data
1. Set up the other infrared compatible device to receive data.
2. Select Via Infrared from the Options menu of a function and
press J (Select).
File Transfer
• If a USB cable is connected to your phone while you are using
infrared, the infrared communication ends.
• When infrared is used to send/receive data, Flight mode is set.
The indicator appears at the top of the display while Flight
mode is set, except when a dial-up connection is established.
Within 20 cm
Note