Toshiba TX80 - Manual (Page 62)

62 Video Telephony
Video Calling allows two parties with Video Calling compatible phones
to see each other’s image during the call.
Indicators
The following indicators appear during video calls.
/ : 3G-network Coverage Area
: Video Calling
: Handsfree On
: Mute My Voice
: Mute All
: Image Transfer Off
: Sending Picture
: Image Quality (Motion Prioritised)
: Image Quality (Standard Mode)
: Image Quality (Macro Mode)
: Video Connection Established
: Voice Connection Established
1. In standby mode, confirm that the or indicator for
indicating you are in an area with 3G-network coverage is
displayed.
2. Enter a phone number and press H.
When Appearance Check is set to On (page 65), the camera
image of yourself can be checked on the display before it is sent
out to the other party.
The sound automatically switches from the earpiece to the
speaker, thus enabling you to begin a handsfree call.
3. Press O to end the call.
Video Calling
• A video call is only possible in areas with 3G-network coverage.
• The Video Calling function of your phone complies with the 3G-
324M international standard for 3G mobile videophones.
Note
Making a Video Call
• You cannot make video calls if the total cost reaches the specified
maximum call limit when the cost limit (page 30) is set to On. To
make a new call, set the cost limit to Off.
• If a video call connection could not be established, a message
appears and a warning tone plays. To make a voice call instead,
press
j J (Yes).
• When the cost limit (page 30) is set to On, a video call will be
disconnected if the total cost reaches the specified maximum call
limit during the call.
Note