Toshiba TX80 - Manual (Page 63)

Video Telephony 63
When a video call is received, the ringtone plays, the external light
flashes and the Video Call screen appears on the main display.
1. Press N when a video call is received.
The sound automatically switches from the earpiece to the
speaker, thus enabling you to begin a handsfree call. However, if
the phone profile (page 101) is set to Silent when a video call is
received, the caller’s voice is heard from the earpiece. To switch
the sound from the earpiece to the speaker, press
K ( )
during a call.
During the call, the substitute picture set in the Outgoing Video
setting on the right is sent to the other party.
2. Press O to end the call.
The following convenient functions are available during calls.
Video Calling Options
You can perform the following operations if you press J (Options)
during a video call.
◆ Hold: Allows you to place a call on hold. While on hold, voice
guidance notifies the other party that he/she has been placed
on hold. The other party is also sent the picture preset for the
Hold Guidance setting (page 65).
◆ Mute: Allows you to mute just the outgoing voice or both the
incoming voice and outgoing voice.
◆ Screen Settings: Allows you to switch the screen display,
send a picture and set picture quality.
•
Switch Screens: Allows you to select the screen display
method for the call.
• Outgoing Video: Allows you to preset the outgoing image
to send during the call.
• Sending Picture: Allows you to send a picture in Gallery
during the call.
• Picture Quality: Allows you to set the picture quality and
motion speed of the incoming video.
Answering a Video Call
• When the cost limit (page 30) is set to On, a video call will be
disconnected if the total cost reaches the specified maximum call
limit during the call.
• Before answering a video call, you can check the camera image
of yourself on the display by pressing j J (Options) and selecting
Self-view.
Note
Tip
Convenient Functions for
Video Calling