Battery pack, Inserting & removing the battery pack – Toshiba TX80 User Manual

Page 22

Advertising
background image

22

Basic Operations

Before using your phone for the first time, charge the battery. Make
sure the power is turned off before removing the battery pack.

Inserting & Removing the Battery Pack

1. Slide the battery cover by pressing the notch with your fingertip.

2. Lift off the battery cover.

3. Insert the battery pack while making sure the socket on the

bottom of the battery pack is aligned with the connector in the
battery compartment.

To remove the battery pack, insert a fingernail beneath the tab
and lift out the battery pack.

4. Place the battery cover on your phone and slide it until it clicks

into place.

• Most GSM networks support the internationally recognised

emergency numbers of 112 and 911 (for the USA), consult your
service provider in the country you are in for the correct number
to dial in an emergency.

• Calls cannot be made to emergency services while data

communication is being performed within a GSM area. End data
communication before making a call.

• If the system mode is set to

3G Only or GSM Only, calls cannot

be made to emergency services if the selected network is
unavailable. Change the system mode setting (page 110) before
making a call.

Note

Battery Pack

Notch

Finger tab

Advertising