Telex Firefly P200 - Manual (Page 14)

8. If you are using a Macintosh computer, the connections are
shown in Figure 8:
a. Unplug the monitor cable from the computer.
b. Plug the adapter labeled either “550093-0" or “550093-2" into
the monitor port of the computer.
c. Plug one end of the supplied VGA/SVGA cable into the adapter
on the computer.
d. Plug the other end of the VGA/SVGA cable into the COMPUTER
jack on the Firefly
™
P200/P250.
e. To use your computer monitor along with your Firefly
™
, select
the adapter labeled either “550093-1” or “550093-3.” Plug the
adapter into the
MONITOR jack on the Firefly
™
P200/P250;
plug the computer monitor cable into the adapter.
NOTE: Use the “550093-2" and “550093-3" adapters with the 12-inch
Macintosh monitor, or the 15-inch Multisync monitor.
☞
External
Amplified
Speaker
VCR or
Laserdisc
Video
Super VHS
Video
COMP
UTER
MONITOR
AUDIO
OUT
AUDIO
IN
SVHS
VIDEO MACINTOSH
COMPUTER &
MONITOR
ADAPTER
550093-000 or -002
ADAPTER
550093-001 or -003
Line Level
Stereo Audio
Input
VCR or Laserdisc
Stereo Audio Input
(use dual RCA to
1/8" Stereo cable)
Figure 8. P200/P250 to MacIntosh Connections
User Manual 9