Telex Firefly P200 User Manual
Page 23
Illuminated Indicators
POWER
The
POWER
button glows red when the P200/P250 is plugged into an
AC wall outlet and is ready to be turned on.
Keypanel
When the keypanel is lit, indicates that the P200/P250 is in operation; the
projector lamp should also be on.
REPLACE LAMP
When lit,
REPLACE LAMP
indicates that the
LAMP HOURS
value is
zero. Refer to the
LAMP HOURS
Menu Mode On-Screen control and
the Lamp Replacement section of this manual.
Remote Control
The RC-8 remote control can be used to remotely change all of the
keypanel and on-screen control functions. When a remote control
button is pressed, the LED on the remote control blinks rapidly.
NOTE: When the remote control operating distance becomes too short
for your purposes, install a fresh battery as described in the Remote
Control Battery section of this manual.
To use the remote control, point it at the front of the projector and press
a key, or “bounce” the IR signal off the viewing screen.
☞
18 User Manual