Topcom BUTLER 5400 - Manual (Page 11)

Topcom Butler 5400
EN
GLISH
Topcom Butler 5400 11
“
*
• Press NAMES then OPTIONS.
• Scroll to Copy From SIM and press OK. The Copy From SIM screen is displayed.
• Enter the SIM card PIN code if requested and press OK. During copying, the screen shows the name of each entry
as it is copied. When finished you see Done. If you enter the wrong PIN twice, Copy SIM Failed is displayed and
the screen returns to standby. If the handset memory becomes full during copying the screen shows Memory Full.
Not All Copied.
• Press and hold Back to return to standby.
Note:If the handset memory becomes full during copying, not all the entries will be transferred. The maximum number
of entries is 150. If your handset phonebook already contains 100 entries, only the first 50 entries on the SIM card
will be copied. Your Butler 5400 checks all available directory memory spaces on your mobile SIM card. During
copying, the “handset on base” LED will flash. If you forget your PIN or if the SIM card becomes locked because
the wrong code has been entered, please check with your mobile network provider how to unlock.
Any international numbers stored on your SIM card may be prefixed by ‘+’. The ‘+’ will be automatically replaced
by the international prefix ( see § “8.5 SIM COUNTRY CODE SETTINGS” ).
You can copy the contents of several SIM cards, within the limit of 150 entries!
5 CALLER IDENTIFICATION
!! This service only works when you have a Caller ID/Clip subscription. Contact your telephone
company !!
When you receive a call, the telephone number of the caller appears on the handset display. The telephone can receive
calls in both FSK and DTMF. You can also see his or her name if it’s transmitted by the network. If the name is
programmed in the Phone Book, the name in the Phone Book is displayed!
The telephone can store 50 calls in a Call List (received and missed) that can be reviewed later. When the memory is
full, the new calls automatically replace the oldest calls in the memory. Missed calls are signalled by an icon on the
display and by the
LED in the base.
To read the received calls:
There are 3 ways to show the missed calls:
1) To consult the missed call list when display shows the missed calls amounth during standby:
•
Press Read and scroll to the list with the navigator keys and .
The missed calls that you have not consulted are marked with a “
2) To consult missed calls after activating other telephone functions:
•
Press and you will immidiatly see the Received call list (combination of received and missed calls).
• Scroll to the list with the navigator keys or .
Press to dial a number or select ‘Options’ to delete the entry, see further details or add the number to the phone
book.
3) By the menu (See §“6 Calls list” below)
6 CALLS LIST
Your Butler 5400 keeps a list of all your last calls.
•
Received Calls: shows details of all recent callers.
• Missed Calls: shows details of calls that were not answered.
• Dialled Calls: list shows details of the last 20 calls made from your handset.
A combined total of 50 calls can be stored in the Received and Missed calls.
Missed and received calls
You can access the Calls list using the navigator button or the menu.
To use the navigator button:
•
From the standby screen, press . New calls are indicated with an *. Press or to scroll through the
list. A beep is played when you reach the first and last calls in the list.