Topcom BUTLER 5400 - Manual (Page 9)

Topcom Butler 5400
EN
GLISH
Topcom Butler 5400 9
3.6 ADJUST EARPIECE/HANDSFREE VOLUME
During a normal or handsfree call, press or to select volume 1-5.
3.7 REDIAL A NUMBER FROM THE LIST
You can redial up to 20 of the last numbers called. If you have stored a name in the phonebook to go with the number,
the name will be displayed instead (see § “4 Phonebook” ).
Redial a number from the list:
•
Press to enter the redial list. Scroll with or until the number you want is displayed.
• Press to dial the number.
Note: You can also consult the called list by the menu (See § “6 Calls list”) for more details.
3.8 SECRECY FUNCTION (MUTE FUNCTION)
During conversation you can turn off the microphone so that the person on the other side of the line will not hear you:
•
Select ‘SECRECY’ using the left menu key to deactivate the microphone.
• ‘SECRECY ON’ appears on the display
• Press the left menu key “Off”again to activate the microphone again
3.9 LOCATING A HANDSET (PAGING FUNCTION)
If you forgot where you left your handset you can press the paging key on the base. All handset registered with the
base will ring for about 30 seconds.
The
LED on the base will flash. To stop the ringer, press any key on the handset.
3.10 KEYPAD LOCK
You can lock the keypad to prevent accidental dialling while carrying the handset around.
•
Press and hold the ‘#’-key until ‘Keypad locked’ and icon appears
• To unlock press left menu key ‘UNLOCK’ and confirm with ‘YES’
3.11 USING A HEADSET (NOT INCLUDED)
The headset lets you make and receive calls without having to hold the handset.
Plug the headset into the socket on the side of the handset. You can now make and receive calls with the headset.
4 PHONEBOOK
Each handset can store up to150 names and numbers. Names can be up to 16 characters long and numbers up to 20
digits.
To add an entry
• Press right menu key ‘NAMES’.
• If the Phonebook is empty, select ‘Add Entry’ and press ‘OK’
OR
• If names have been stored, they are listed. Press ‘OPTIONS’. ‘Add Entry’ is highlighted. Press ‘OK’.
• Use the keypad to enter the name, then press ‘OK’.
• Use the keypad to enter the number, then press ‘OK’. The screen shows the phonebook name list.
• Press and hold ‘Back’ to return to standby.