TOA Electronics SPEEDTOUCH 570 - Manual (Page 19)

1 SpeedTouch™570 Installation
3EC 17766 BAAA TCZZA Ed. 01 19
1.4.1 Configuration Setup for MS Windows OSs
Microsoft Windows One of the following OSs must be installed on your PC(s):
• Microsoft Windows 95
• Microsoft Windows 98 or 98SE
• Microsoft Windows ME
• Microsoft Windows NT4.0
• Microsoft Windows 2000
• Microsoft Windows XP.
You may need the Windows installation CD-rom during installation.
TCP/IP Make sure that TCP/IP (*) is installed on your PC(s).
(*) Transmission Control Protocol (TCP) / Internet Protocol (IP)
The SpeedTouch™
Setup Wizard
The SpeedTouch™ Setup wizard can be divided in into two parts:
• The detection procedure
• The configuration procedure.
The detection
procedure
Step Action
1 Insert the SpeedTouch™ Setup CD-rom in your PC's CD-rom drive. The
wizard will start automatically.
Note If the wizard does not start automatically, open a 'Run' window via
Start > Run from the Start menu and enter the following path:
D:\Setup.exe, where D is the drive letter of your CD-rom drive.
2 The SpeedTouch™ Welcome window pops up:
To start the SpeedTouch™ Setup wizard, click SpeedTouch™ Setup.