TOA Electronics SPEEDTOUCH 570 - Manual (Page 23)

1 SpeedTouch™570 Installation
3EC 17766 BAAA TCZZA Ed. 01 23
5 The SpeedTouch™ Setup wizard will appear again to announce that the
configuration has been successful:
Click finish to close the wizard.
6 For enhanced security, after going through the SpeedTouch™570 configura-
tion setup procedures, you are able to “personalize” the SpeedTouch™570
Wireless configuration. See
“1.3 Wireless Connectivity” on page 13 for more
information.
In case you want to enable multiple PCs on your local network for accessing
the SpeedTouch™570 and the Internet, no additional configuration of your
PCs must be done in most cases, except the WLAN client configuration. This
because most configuration profile will enable the SpeedTouch™570 DHCP
server - and a PC’s Ethernet interface is configured as DHCP client by default.
To make sure that all PCs are configured as expected (DHCP or fixed IP
addresses) you can re-run the SpeedTouch™ Setup wizard on every PC.
For fixed IP configurations, or other advanced settings, please follow the
instructions provided by your ISP or network administrator.
Step Action