TOA Electronics SPEEDTOUCH 570 - Manual (Page 39)

2 SpeedTouch™570 Web Interface
3EC 17766 BAAA TCZZA Ed. 01 39
NAT Click this button to display the Network Address and Port Translation (NAPT) page.
This page allows you to:
• Overview or add/delete specific static NAPT entries:
You can add static NAPT entries by clicking New. Specify the outside address and
inside address for the entry as well as the protocol and port to which the entry
applies. If the NAPT entry is applied to a connection’s dynamically assigned local
peer IP address, you should specify 0.0.0.0 as the outside address. Click Apply to
add the entry to the table.
• Define a default server:
By specifying a default server IP address all incoming connections will be
forwarded to the device with this IP address. In most cases this setting should be
adequate for most server applications and will make the need for specific static
NAPT entries redundant.