TOA Electronics SPEEDTOUCH 570 - Manual (Page 29)

2 SpeedTouch™570 Web Interface
3EC 17766 BAAA TCZZA Ed. 01 29
2 SpeedTouch™570 Web Interface
Introduction The SpeedTouch™570 comes with integrated local configuration capabilities.
The local configuration, via the SpeedTouch™570 web interface, is based on the HTTP
server/web browser concept.
It allows you to configure your SpeedTouch™570 via a web browser using HTML pages
from any local computer attached to the SpeedTouch™570 (Wireless) LAN.
Requirements Before you access the SpeedTouch™570 pages, make sure that your browser is config-
ured to directly connect to the SpeedTouch™570, I.e. that it is not using a Proxy server.
If required, you can disable the proxy server for the time you want to access the Speed-
Touch™570 web pages.
For more information on how to disable your web browser's proxying, please consult
the web browser's help pages.
Use of the
SpeedTouch™570 web
interface
In most cases, the SpeedTouch™570 is correctly configured for your Internet connec-
tivity via the appropriate configuration profile/file and no further configuration on the
web interface is needed.
Access to the web pages is only required for some advanced configurations and
upgrading/updating or backing up the SpeedTouch™570 configuration.
Access to the
SpeedTouch™570 web
interface
To access the SpeedTouch™570 web pages:
Step Action
1 Start the web browser on your PC or computer.
2 Browse to the SpeedTouch™570 at the SpeedTouch™'s IP address (in most
cases 10.0.0.138).
3 If a system password has been set, an authentication window will be displayed.
Enter user name and system password in the appropriate fields.