TP-Link TD-W8970N - Manual (Page 19)

TD-W8970N Wireless N ADSL2+ Modem Router User Guide
)
Note:
The Quick Setup Wizard will guide you to configure the WAN Service over ATM interface.
4. On the Wireless Configurations screen, we use the default SSID, select Network
Authentication (take WPA-PSK/WPA2-PSK for example), set a Pre-Shared Key, and then
click Save to continue.
Figure 3-7
)
Note:
All the existed ATM&WAN service will be cleared after clicking the Save button on this Quick
Setup page.
5. You will see the Finish screen below, click Reboot to save these settings.
Figure 3-8
6. Now, your ADSL Modem Router has been configured and is rebooting. Please do not power
12