3 atm-eoa-bridging, 4 atm-pppoa – TP-Link TD-W8970N User Manual
Page 36
TD-W8970N
Wireless N ADSL2+ Modem Router User Guide
Figure 4-19
4.4.2.3 ATM-EoA-Bridging
If you want to adopt the Bridge service and you need to use an ATM Interface, follow the steps
below to add a WAN service over a selected ATM interface:
1. Add a new ATM interface and select EoA option for DSL Link Type (see
2. Click
the
Add
button on the screen Figure 4-7. Select WAN Service Interface over ATM PVC
on the next screen (as shown Figure 4-8).
3. Select Bridging option for the WAN service type on the screen (as shown Figure 4-9), and
click Next button to continue.
4. On the screen (as shown Figure 4-13) you will see the detailed settings you’ve made. Please
click the Apply/Save button to save these settings.
4.4.2.4 ATM-PPPoA
If your ISP provides a PPPoA connection and you need to use an ATM Interface, follow the steps
below to add a WAN service over a selected ATM interface:
1. Add a new ATM interface and select PPPoA option for DSL Link Type (see
2. Click
the
Add
button on the screen Figure 4-7 and the next configuration is similar to PPPoE,
. The difference is that you don’t need to set the
PPPoE Service Name
and Bridge PPPoE Frames Between WAN and Local Ports
on the
29