TP-Link TD-W8970N - Manual (Page 89)

TD-W8970N Wireless N ADSL2+ Modem Router User Guide
¾ Add: Click this button to add the MAC Address.
¾ Remove: Select the item of the MAC Address and click this button to remove it.
When you click the Add button, the pop-up picture shown below, and then you can type the MAC
Address in the MAC Address field.
)
Note:
The form of MAC Address must be “xx:xx:xx:xx:xx:xx”, like “00:13:0A:55:FF:09”.
Figure 4-87
When you finished making changes to the MAC Filter List screen, click Save/Apply to save the
changes.
4.5.4 Wireless Bridge
Choose “Wireless”Æ”Wireless Bridge”, you will see the screen of Wireless--Bridge settings
shown as below. You can configure wireless bridge features of the wireless LAN interface and
click Apply/Save button to save the current configuration.
Figure 4-88
¾ AP Mode: Select an AP Mode from the drop-down list. Options available are: Access Point
and Wireless Bridge.
82