TP-Link TD-W8970N - Manual (Page 68)

TD-W8970N Wireless N ADSL2+ Modem Router User Guide
Figure 4-63
¾ IPSec Connection Name: Enter a name for your VPN.
¾ Remote IPSec Gateway Address (IP or Domain Name): Enter the destination gateway IP
address in the box which is the public WAN IP or Domain Name of the remote VPN server
endpoint. (For example: Input 219.134.112.247 in Device1, Input 219.134.112.246 in Device
2
)
¾ Tunnel access from local IP addresses: Choose Subnet if you want the Whole LAN to join
the VPN network, or else choose Single Address if you want single IP to join the VPN network.
¾ IP Address for VPN: Enter the IP address of your LAN. (For example: Input 192.168.1.1 in
Device1 , Input 192.168.2.1 in Device2)
¾ IP Subnetmask: Enter the Subnet mask of your LAN. ( For example: Input 255.255.255.0 in
both Device1 and Device2)
¾ Tunnel access from remote IP addresses: Choose Subnet if you want the Remote Whole
LAN to join the VPN network, or else choose Single Address if you want single IP to join the
VPN network.
¾ IP Address for VPN: Enter the IP address of the Remote LAN. ( For example: Input
192.168.2.1 in Device1,Input 192.168.1.1 in Device2)
¾ IP Subnetmask: Enter the subnetmask of the remote LAN. ( For example: Input
255.255.255.0
in both Device1 and Device2)
61