Yamaha DVD-C900 - Manual (Page 17)

13
English
DVD
1
MIXED 2CH VIDEO COMPONENT VIDEO
VIDEO OUT
S VIDEO
Y P B P R
1
2
DIGITAL VIDEO OUT SELECT
VIDEO/
S VIDEO
COMPONENT
VIDEO OUT
MPEG/DTS
COAXIAL OPTICAL
PCM/ DIGITAL
AUDIO OUT
REMOTE
CONTROL
OUT IN
Amplifier
Connections
Ⅵ
Connecting to a stereo amplifier that has neither 6 channel audio signal
input terminals nor Dolby Digital decoder
Connect this unit’s MIXED 2CH AUDIO OUT terminals to the amplifier’s audio signal input terminal printed as “DVD”, “VIDEO”,
“AUX”, etc.
6 channel audio signals encoded with Dolby Digital are mixed down into 2 channels and output from the MIXED 2CH AUDIO OUT
terminals.
Note
If you have no stereo amplifier available, you can connect this unit’s MIXED 2CH AUDIO OUT terminals to your TV’s audio signal
input terminals (if your TV is equipped with RCA type audio signal input terminals).
Refer to pages 14-15 for VIDEO
OUT terminal connections.
Refer to pages 14-15 for VIDEO
OUT terminal connections.
This unit (U.S.A. model)
For Custom Installer For U.S.A. model only
REMOTE CONTROL (IN, OUT) terminals
These terminals are used for custom installation system.
When this unit is connected to the components for custom
installation system, you can operate this unit with the
system remote control.
Connect the REMOTE CONTROL IN terminal of this unit to
the output terminal of the central controller for custom
installation system.
By connecting the REMOTE CONTROL OUT terminal of
this unit to the REMOTE CONTROL IN terminal of the other
component, you can also operate it with the system remote
control. In this way, up to 6 components can be connected
in series.
REMOTE
CONTROL
OUT IN
Connection cord
(included)