Yamaha DVD-C900 - Manual (Page 19)

15
English
1
MIXED 2CH VIDEO COMPONENT VIDEO S VIDEO
Y P B P R
Y P B P R
1
2
DIGITAL VIDEO OUT SELECT
VIDEO/
S VIDEO
COMPONENT
VIDEO OUT
MPEG/DTS
COAXIAL OPTICAL
PCM/ DIGITAL
AUDIO OUT
VIDEO OUT
VIDEO OUT SELECT
VIDEO/
S VIDEO
COMPONENT
VIDEO OUT
Connections
Ⅵ
Connecting to a TV equipped with component video input terminals
You can connect this unit’s COMPONENT VIDEO OUT
terminals to your TV or projector, if your TV or projector has
component video signal input terminals.
The COMPONENT VIDEO OUT terminals output three types of
chrominance signals separately. By this connection, you can
enjoy high quality pictures with vivid colors.
If you make this connection, be sure to set the VIDEO OUT
SELECT switch to the “COMPONENT VIDEO OUT”
position. Note
Do not connect this unit’s COMPONENT VIDEO OUT
terminals to component video input terminals special for HD
(High-Definition) TV.
Video connection
cords (not included)
This unit is designed for use with the NTSC and PAL
television formats. Set this switch to the position for the
format your TV monitor employs. PAL: Set to this position if your TV monitor employs the
PAL format.
NTSC: Set to this position if your TV monitor employs the
NTSC format.
Notes
• Be sure to change the setting of this switch only when
this unit is turned off or the power cord of this unit is
disconnected from the AC outlet.
• If “6 Signal System Conversion” on the SET UP menu is set
to “Disc”, the setting of this switch becomes ineffective when
a DVD or Video CD disc is played back. The format
employed on the disc currently played back is automatically
selected.
MODE SELECT (PAL/NTSC) switch
<
China and General models only
>
EO
COMPONENT VIDEO
VIDEO OUT
MODE SELECT
PAL NTSC
S VIDEO
Y P B P R
TV monitor
Refer to pages 10-13
for AUDIO OUT
terminal connections.
This unit (U.S.A. model)