Yamaha DVD-C900 - Manual (Page 62)

58
6
Signal System Conversion
[
and only
]
(for China and General models only)
This unit is designed for use with the NTSC and PAL televison
formats. You have already selected the format your TV
monitor employs with the MODE SELECT (PAL/NTSC) switch
on the rear panel.
However, if you prefer, you can change the setting so that this
unit outputs video signals in the same format with the disc
being played back.
1
When the SET UP group “Display Settings” is
selected, press
or to select “6 Signal System
Conversion”, and then press SELECT.
2
Press or to select the preferred format, and
then press SELECT.
1 Switch Generally select this.
Video signals are output from this unit in the
format selected with the MODE SELECT
(PAL/NTSC) switch on the rear of this unit.
(Refer to page 15.)
2 Disc Select this if your TV monitor employs both
PAL and NTSC formats.
* This unit outputs signals in the same
format with the disc currently played back.
Factory default setting: Switch
VCD DVD
Initial settings (on the SET UP menu)
1 2 3 4 5
6
+10
7 8 9 0
A-B S/F CANCEL
ANGLE
SELECT TITLE AUDIO
MENU SUBTITLE
SET UP
ON SCREEN
OFF/ON
MULTI SPEED
RETURN TITLE/INDEX
REPEAT
DISC SKIP
PROG RANDOM
DISC MODE TIME
OPEN/
CLOSE
STOP STILL/PAUSE
SKIP/SEARCH
PLAY
1, 2
Display VCD Settings Display Audio DVD
Guide Display ON 1
OSD Language English 2
Background Screen Picture 1 3
Screen Saver ON 4
FL Dimmer Normal 5
Signal System Conversion Switch 6
Display
Switch 1
Disc 2
Settings Signal System Conversion