Tascam DS-M7.1 - Manual (Page 18)

3 – Connections
18
TASCAM DS-M7.1
Dimmer and mute control connections
A remote box for mute ( MUTE ALL ) and dimmer
control may be made up and used so that the control
of these functions can be carried out from a location
in the listening environment other than the main mix-
ing location.
Use non-latching push-to-make switches wired to a
common sleeve ground with the dimmer wired to
ring, and the mute to the tip of a standard 3.5 mm ste-
reo plug. The detection of the change in level, rather
than the open/closed status of the switch triggers the
change in the unit’s status.
A remote box fitted with these switches can operated
alongside the appropriate front panel switches (it
does not replace them).
See “Dimmer level” on page 17, “Dimming the out-
put” on page 21 and “Muting all the channels” on
page 21.
3.5 mm jack
TIP
RING
SLEEVE
MUTE KEY
DIMMER KEY
External non-latching
switches
MUTE ALL
key
push push
Push action only
is detected
release release
OFF OFF ON
MUTE ALL
status